Robotronics Buzz E Betriebsanleitung PDF herunterladen (Seite 9)

Chapter 1 Getting Started: Transporting

Step # 6 Running the House with a separate control box and extension wire(optional

feature)

1. Attach the extension wire to the back of the operator control box. There is a round

connector on the back of the Smoke Alarm base unit to connect to. Put the two connectors

together, rotate the connector until it sits into the mating connector and then twist the ring

until it stops.

2. With the control box option you can operate the house automatic or manually. For

automatic operation, just insert the programmed CD and press play. For manual operation

use the switches of the control box to operate the Smoke Alarm and lights of the House.

The headset microphone will allow you to be the voice of the Smoke Alarm and also hear

children talking to you.

3. Video Monitor Option: There is a video cable and power wire that comes with the monitor.

The power wire plugs in to the back of the control box and then to the DC in jack on the

monitor. The video plug is yellow and it runs from the control box to the video in of the

monitor.

4. Set the volume levels. There is volume level for the music and the Smoke Alarm’s voice

on the operator control box. There is also a volume on this same box for the volume of your

hearing in the headset.

Step # 7 Test all the functions

Test all of the functions of the House and Smoke Alarm: For the Smoke Alarm test the eyelids,

eyes left and right, eyebrows, arms, and mouth movement. For the House, check the room

lights, Smoke Alarm LEDs, and danger LEDs. You are now ready to operate the House and

Smoke Alarm.

On a new system, the house will have a plastic protective covering over the color panels.

You may remove this now.

Step # 8 Powering Down

1. Turn off the CD player.

2. Turn off the main power switch on the base unit.

3. Turn off the power supply (or disconnect the optional battery).

4. Disconnect the power supply from the 110V outlet.

TRANSPORTING

¾ Remove the chimney from the top of the house. It is held on by velcro.

¾ You can leave the Smoke Alarm on the base unit if you want. If you have removed the

cover, attach this to better protect the Smoke Alarm.

¾ Make sure the latches on the side of the House are secure before transporting.

¾ Disconnect the extension wire from the back of the house.

¾ Put the front house panels back on.

¾ Put the House in the canvas carrier to protect it from scratching or damage.

¾ Put all other accessories in the canvas carry bags.

¾ Do not allow anything sharp or hard to push against the room panels.

¾ Protect the plastic cover from getting scratched.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Keine Kommentare

Robotronics Buzz E Betriebsanleitung Seite 9